-- card: 8073 from stack: in.7
-- bmap block id: 3734
-- flags: 0000
-- background id: 6834
-- name: ChptLstCrd


-- part 2 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=21 top=288 right=315 bottom=88
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Quit
----- HyperTalk script -----
on mouseUp
  answer "Perhaps you accidently pressed Quit?" with "Yes I did" or "No I didn't"
  if it is "No I didn't" then domenu "Quit Hypercard"
end mouseUp




-- part 3 (field)
-- low flags: 00
-- high flags: 2007
-- rect: left=254 top=0 right=342 bottom=512
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 0
-- font id: 3
-- text size: 9
-- style flags: 0
-- line height: 12
-- part name: ChptLstFld
----- HyperTalk script -----
on mouseup
  global Chapt,ChptName
  Put the number of lines in card field "ChptLstFld" into NumChapt
  if NumChapt is 0 then exit mouseup
  set locktext of card field "ChptLstFld" to false
  put item 2 of the clickloc into Ln
  put item 1 of the rect of card field "ChptLstFld" into Left
  add 6 to Left
  put item 3 of the rect of card field "ChptLstFld" into Right
  subtract 19 from Right
  click at Right,Ln
  click at Left,Ln with shiftkey
  if the selection is empty then
    beep 2
    click at 0,0
    set locktext of card field "ChptLstFld" to true
    put number of lines in card field "ChptLstFld" into LastLn
    repeat with x = 1 to LastLn
      if line x of card field "ChptLstFld" is empty then
        delete line x to lastLn of card field "ChptLstFld"
        exit repeat
      end if
    end repeat
    exit mouseup
  end if
  put the selection into ChptName
  set locktext of card field "ChptLstFld" to true
  repeat with x = 1 to NumChapt
    if the selection is line x of card field "ChptLstFld" then exit repeat
  end repeat
  put line x of card field "ChptOrdrFld" into ChaptNum
  put Bs10To26(ChaptNum) into Chapt
  visual effect zoom open slowly
  go to card Chapt
  if the result is not empty then NoTpcCrd
end mouseup



-- part 28 (field)
-- low flags: 81
-- high flags: 0007
-- rect: left=87 top=102 right=217 bottom=150
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 0
-- font id: 3
-- text size: 9
-- style flags: 0
-- line height: 12
-- part name: ChptOrdrFld


-- part 33 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=93 top=256 right=283 bottom=160
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Contents
----- HyperTalk script -----
on mouseup
  global Chapt
  repeat while true
    go to card "ChptLstCrd"
    put number of lines in card field "ChptLstFld" + 1 into ChaptNum
    put "Name Chapter" && ChaptNum into Prompt
    ask prompt
    if it is empty then exit mouseup
    put it into UsrChptNam
    put 1 into x
    repeat while true
      put "Name Topic" && x && "of Chapter" && ChaptNum into prompt
      ask prompt
      if it is empty then
        go to card "ChptLstCrd"
        if x > 1 then exit repeat
        if x is 1 then exit mouseup
      end if
      put it into UsrTpcNam
      if x is 1 then
        put UsrChptNam & return after card field "ChptLstFld"
        put ChaptNum & return after card field "ChptOrdrFld"
        put Bs10To26(ChaptNum) into Chapt
        set cursor to 4
        set lockscreen to true
        put MakeCard("TpcLstTmplt") into dummy
        set lockscreen to false
        set the name of this card to Chapt
        set lockscreen to false
      end if
      put UsrTpcNam & return after field "TpcLstFld"
      set lockscreen to true
      set cursor to 4
      put the number of lines in field "TpcLstFld" into TopicNum
      put TopicNum & return after field "TpcOrdrFld"
      put MakeCard("NtTmplt") into dummy
      put Chapt & TopicNum into NtCrdNam
      set the name of this card to NtCrdNam
      put UsrTpcNam into field "HeaderFld"
      go to card Chapt
      flash 2
      add 1 to x
      set lockscreen to false
    end repeat
  end repeat
end mouseup


-- part 34 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=165 top=256 right=283 bottom=232
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Delete
----- HyperTalk script -----
on mouseUp
  put number of lines in card field "ChptLstFld" into LstChptNum
  if LstChptNum is 0 then exit mouseup
  ask "Delete which chapter?"
  if it is empty then exit mouseup
  put it into DelChoice
  put hilite of card button "ExactMtch" into ExactMatch
  set cursor to 4
  repeat with LnClicked = 1 to LstChptNum
    if Exactmatch then
      if DelChoice is line LnClicked of card field "ChptLstFld" then
        exit repeat
      end if
    else
      if DelChoice is in line LnClicked of card field "ChptLstFld" then
        exit repeat
      end if
    end if
    if LnClicked is LstChptNum then
      beep 1
      put "The name you entered is not in the list!"
      wait 2 seconds
      hide msg
      exit mouseup
    end if
  end repeat
  set lockscreen to true
  put line LnClicked of card field "ChptOrdrFld" into ChptOrdrNum
  put Bs10To26(ChptOrdrNum) into ChptName
  if ChptOrdrNum is LstChptNum then
    delete line LnClicked of card field "ChptOrdrFld"
    delete line LnClicked of card field "ChptLstFld"
    put DelCards(ChptName) into dummy
  else
    repeat with x = 1 to LstChptNum
      if line x of card field "ChptOrdrFld" is LstChptNum then exit repeat
    end repeat
    put ChptOrdrNum into line x of card field "ChptOrdrFld"
    delete line LnClicked of card field "ChptLstFld"
    delete line LnClicked of card field "ChptOrdrFld"
    put DelCards(ChptName) into dummy
    put Bs10To26(LstChptNum) into LstChapName
    go to card LstChapName
    set name of this card to ChptName
    put number of lines in field "TpcLstFld" into LstTpcNum
    repeat with x = 1 to LstTpcNum
      go to card LstChapName & x
      set name of this card to ChptName & x
    end repeat
  end if
  go to card "ChptLstCrd"
  set lockscreen to false
  flash 2
end mouseUp



-- part 35 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=93 top=288 right=315 bottom=160
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Rename
----- HyperTalk script -----
on mouseUp
  Put number of lines in card field "ChptLstFld" into NumChapt
  if NumChapt is 0 then exit mouseup
  ask "Rename what Chapter?"
  if it is empty then exit mouseup
  put it into ChToRenam
  put hilite of card button "ExactMtch" into ExactMatch
  set cursor to 4
  repeat with LnNum = 1 to NumChapt
    if Exactmatch then
      if ChToRenam is line LnNum of card field "ChptLstFld" then
        exit repeat
      end if
    else
      if ChToRenam is in line LnNum of card field "ChptLstFld" then
        exit repeat
      end if
    end if
    if LnNum is NumChapt then
      beep 1
      put "The name you entered is not in the list!"
      wait 2 seconds
      hide msg
      exit mouseup
    end if
  end repeat
  set cursor to 1
  put "Enter New Title for Chapter" into prompt
  ask prompt
  if it is empty then
    exit mouseup
  else
    put it into NewTitle
    put line LnNum of card field "ChptLstFld" into Temp
    put the number of chars in Temp into EndChar
    repeat with NonSpc = 1 to EndChar
      if char NonSpc of Temp is not " " then exit repeat
    end repeat
    put NewTitle into char NonSpc to EndChar of line LnNum of card field "ChptLstFld"
  end if
  flash 2
end mouseUp



-- part 36 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=165 top=288 right=315 bottom=232
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Insert
----- HyperTalk script -----
on mouseUp
  global Chapt
  put number of lines in card field "ChptLstFld" into TtlNumChpts
  if TtlNumChpts is 0 then exit mouseup
  put "Name for inserted Chapter?" into prompt
  ask prompt
  if it is empty then exit mouseup
  put it into InsertedName
  put "Insert after what chapter? [none]" into prompt
  ask prompt
  if it is empty then exit mouseup
  put it into AfterName
  put hilite of card button "ExactMtch" into ExactMatch
  set cursor to 4
  if AfterName is "none" then
    put 1 into ChptInsrtNum
  else
    repeat with x = 1 to TtlNumChpts
      if Exactmatch then
        if AfterName is line x of card field "ChptLstFld" then
          exit repeat
        end if
      else
        if AfterName is in line x of card field "ChptLstFld" then
          exit repeat
        end if
      end if
      if x is TtlNumChpts then
        beep 1
        put "The name you entered is not in the list!"
        wait 2 seconds
        hide msg
        exit mouseup
      end if
    end repeat
    put x + 1 into ChptInsrtNum
  end if
  put 1 into x
  repeat while true
    put "Name Topic" && x && "of Chapter" && ChptInsrtNum into prompt
    ask prompt
    if it is empty then
      go to card "ChptLstCrd"
      exit mouseup
    end if
    put it into UsrTpcNam
    if x is 1 then
      put InsertedName & return before line ChptInsrtNum of card field "ChptLstFld"
      put TtlNumChpts + 1 into LstChptNum
      put LstChptNum & return before line ChptInsrtNum of card field "ChptOrdrFld"
      put Bs10To26(LstChptNum) into Chapt
      set cursor to 4
      set lockscreen to true
      put MakeCard("TpcLstTmplt") into dummy
      set lockscreen to false
      set the name of this card to Chapt
    end if
    put UsrTpcNam & return after field "TpcLstFld"
    put the number of words in field "TpcLstFld" into TopicNum
    put TopicNum & return after field "TpcOrdrFld"
    set cursor to 4
    set lockscreen to true
    put MakeCard("NtTmplt") into dummy
    put Chapt & TopicNum into NtCrdNam
    set the name of this card to NtCrdNam
    put UsrTpcNam into field "HeaderFld"
    go to card Chapt
    set lockscreen to false
    add 1 to x
    flash 2
  end repeat
end mouseUp



-- part 37 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=21 top=256 right=283 bottom=88
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: Remove All
----- HyperTalk script -----
on mouseUp
  answer "Delete table of contents & all graphics/text?" with "OK" or "Cancel"
  if it is empty then exit mouseup
  if it is "OK" then
    set cursor to 4
    set lockscreen to true
    go to first card
    put false into essential
    repeat for number of cards
      get short name of this card
      if it is "ChptLstCrd" or it is "TpcLstTmplt" or it is "NtTmplt" or it is "Welcome" then
        put true into essential
        go to next card
      end if
      if not essential then domenu "delete card"
      put false into essential
    end repeat
    if the freeSize of this stack is not 0 then
      if the diskSpace > the size of this stack
      then domenu "Compact Stack"
    end if
    go to card "ChptLstCrd"
    put empty into card field "ChptLstFld"
    put empty into card field "ChptOrdrFld"
    set lockscreen to false
    hide msg
    flash 2
  end if
end mouseUp



-- part 56 (field)
-- low flags: 01
-- high flags: 0002
-- rect: left=115 top=226 right=239 bottom=138
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 3
-- text size: 9
-- style flags: 0
-- line height: 12
-- part name: IndentFld


-- part 59 (button)
-- low flags: 00
-- high flags: 0000
-- rect: left=138 top=225 right=241 bottom=154
-- title width / last selected line: 0
-- icon id / first selected line: 16692 / 16692
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: IncIndent
----- HyperTalk script -----
on mouseUp
  if card field "IndentFld" is not 12
  then add 3 to card field "IndentFld"
end mouseUp



-- part 60 (button)
-- low flags: 00
-- high flags: 0000
-- rect: left=99 top=224 right=240 bottom=115
-- title width / last selected line: 0
-- icon id / first selected line: 3584 / 3584
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: DecIndent
----- HyperTalk script -----
on mouseUp
  if card field "IndentFld" is not 0
  then subtract 3 from card field "IndentFld"
end mouseUp



-- part 61 (button)
-- low flags: 00
-- high flags: 2000
-- rect: left=165 top=224 right=251 bottom=232
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: IndentLst
----- HyperTalk script -----
on mouseUp
  global NumChpt,XactMtch,Xit
  Put number of lines in card field "ChptLstFld" into NumChpt
  if NumChpt is 0 then exit mouseup
  put hilite of button "ExactMtch" into XactMtch
  ask "Name first Topic to be indented"
  if it is empty then exit mouseup
  put it into fTpc
  put GetLnNum(fTpc,"ChptLstFld") into fLnNum
  if Xit then exit mouseup
  ask "Name last Chapter to be indented"
  if it is empty then exit mouseup
  put it into lTpc
  put GetLnNum(lTpc,"ChptLstFld") into lLnNum
  if Xit then exit mouseup
  put card field "IndentFld" into NumIndent
  put empty into Spcs
  repeat for NumIndent times
    put " " before Spcs
  end repeat
  repeat with x = fLnNum to lLnNum
    put line x of card field "ChptLstFld" into Temp
    repeat while char 1 of Temp is " "
      delete char 1 of Temp
    end repeat
    put Spcs before Temp
    put Temp into line x of card field "ChptLstFld"
  end repeat
end mouseUp



-- part 62 (button)
-- low flags: 00
-- high flags: 0000
-- rect: left=53 top=237 right=250 bottom=87
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: PartialMtch
----- HyperTalk script -----
on mouseUp
  set hilite of card button "ExactMtch" to false
  set hilite of card button "PartialMtch" to true
end mouseUp



-- part 63 (button)
-- low flags: 00
-- high flags: 4000
-- rect: left=22 top=237 right=250 bottom=52
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: ExactMtch
----- HyperTalk script -----
on mouseUp
  set hilite of card button "ExactMtch" to true
  set hilite of card button "PartialMtch" to false
end mouseUp



-- part 64 (button)
-- low flags: 00
-- high flags: 0000
-- rect: left=2 top=143 right=165 bottom=252
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: ImportMenus
----- HyperTalk script -----
on mouseUp
  if number of cards > 4 then
    answer "First, remove all stack cards." with "OK"
    exit mouseup
  end if
  put short name of this stack into ToStk
  answer "About to transfer data between stacks…" with "Cancel" or "OK"
  if it is "Cancel" then exit mouseup
  answer "This is the ‘destination’ Summarizer stack." with "OK"
  answer "Choose the ‘source’ Summarizer stack …" with "OK"
  put FileName("STAK") into FromStk
  if FromStk is not empty then
    go to stack FromStk
  else
    exit mouseup
  end if
  set cursor to 4
  put "Reading from ‘source’ Summarizer stack …"
  go to card "ChptLstCrd"
  put card field "ChptOrdrFld" into ChptOrdr
  put the number of lines in ChptOrdr into NumChpts
  put FromStk & ".update" into flName
  open file flName
  write NumChpts & "∆" to file flName
  write card field "ChptLstFld" & "∆" to file flName
  write card field "ChptOrdrFld" & "∆" to file flName
  repeat with x = 1 to NumChpts
    put line x of ChptOrdr into ChptNum
    put Bs10To26(ChptNum) into ChptName
    go to card ChptName
    put field "TpcOrdrFld" into TpcOrdr
    put the number of lines in TpcOrdr into NumTpcs
    write NumTpcs & "∆" to file flName
    write field "TpcLstFld" & "∆" to file flName
    write field "TpcOrdrFld" & "∆" to file flName
    repeat with y = 1 to NumTpcs
      put line y of TpcOrdr into TpcNum
      put Chptname & TpcNum into PgName
      go to card PgName
      if the number of card fields is 1 then
        write "ƒ" & card field "txtFld" & "∆" to file flName
      else
        write "Ω" to file flName
      end if
      go to next card
      put 0 into PgCnt
      put empty into Temp
      repeat while short name of this card is "@"
        if the number of card fields is 1 then
          put "ƒ" &  card field "txtFld" & "∆" after Temp
        else
          put "Ω" after Temp
        end if
        add 1 to PgCnt
        go to next card
      end repeat
      if PgCnt is 0 then
        write "∑" to file flName
      else
        write "¥" & PgCnt & "∆" to file flName
        write Temp to file flName
      end if
    end repeat
  end repeat
  close file flName
  put "Writing to ‘destination’ Summarizer stack…"
  go to stack ToStk
  go to card "ChptLstCrd"
  open file flName
  read from file flName until "∆"
  delete last char of it
  put it into NumChpts
  read from file flName until "∆"
  delete last char of it
  put it into card field "ChptLstFld"
  read from file flName until "∆"
  delete last char of it
  put it into card field "ChptOrdrFld"
  put card field "ChptOrdrFld" into ChptOrdr
  put the number of lines in ChptOrdr into NumChpts
  repeat with x = 1 to NumChpts
    put line x of ChptOrdr into ChptNum
    put Bs10To26(ChptNum) into ChptName
    put MakeCard("TpcLstTmplt") into dummy
    set name of this card to ChptName
    read from file flName until "∆"
    delete last char of it
    put it into NumTpcs
    read from file flName until "∆"
    delete last char of it
    put it into field "TpcLstFld"
    read from file flName until "∆"
    delete last char of it
    put it into field "TpcOrdrFld"
    put field "TpcOrdrFld" into TpcOrdr
    put the number of lines in TpcOrdr into NumTpcs
    put field "TpcLstFld" into TpcLst
    repeat with y = 1 to NumTpcs
      put line y of TpcOrdr into TpcNum
      put Chptname & TpcNum into PgName
      put MakeCard("NtTmplt") into dummy
      set name of this card to PgName
      put line y of TpcLst into field "HeaderFld"
      read from file flName for 1
      if it is "Ω" then
      else
        MakeField
        read from file flName until "∆"
        delete last char of it
        put it into card field "TxtFld"
      end if
      read from file flName for 1
      if it is "∑" then
      else
        read from file flName until "∆"
        delete last char of it
        put it into PgCnt
        repeat PgCnt times
          read from file flName for 1
          if it is "Ω" then
            MakePage
          else
            MakePage
            MakeField
            read from file flName until "∆"
            delete last char of it
            put it into card field "TxtFld"
          end if
        end repeat
      end if
    end repeat
  end repeat
  close file flName
  go to card "ChptLstCrd"
  hide msg
  flash 2
end mouseUp



-- part contents for card part 56
----- text -----
0

-- part contents for card part 3
----- text -----
Will This Stack Ever Crash?
New Features
Shareware Notice


-- part contents for card part 28
----- text -----
1
2
3